Basic Info.
Type
Car/Motorcycle Alarm
Signal Transmission
Wireless Alarm
Application
Indoor, in- Car
Working Principle
Electro-Optical Type
Alarm Volume (within 1m)
≥100dB
Receive Frequency
229.95MHz
Detection
Pupil Accurate Detection Technology
Optional Accessories
Vibration Cushion
Detection Distance
60-90cm
Specification
91.5*42.5*71.3mm
Product Description
car alarm system driver anti sleep device gps tracking chip built in
Product Description
Brief Introduction of Driver Fatigue Detection and Alarming System:
Driver Fatigue Monitor MR688 is a driver and vehicle safety product which can accurately predict and warn driver's sleeping during the driving to protect driver's life and avoid the damage to the vehicle. It can also connect with GPS system and send the fatigue information to the fleet management center for mangers to make better management strategies in accordance with the driver's performance and save more cost for the enterprises. We started this product with military, and now lots of military, mining and government's vehicles are using our product MR688.
Function | Standard Version | Professional Version | RS232 Version |
Sensitivity | Adjustable | Adjustable | Adjustable |
Volume | Adjustable | Adjustable | Adjustable |
Over Speed Alarm | No | Yes | Yes |
Low Speed No Alarm | No | Yes | Yes |
Alarm Image Output | No | No | Yes |
Signal Interface | No output | Level output | RS232 |
Video Output | No | Optional | Optional |
Product Parameter:
Product Name | Driver Fatigue Monitor |
Product Model | MR688 |
Patent No. | 201029044149.4 |
Software Copyright No. | 2009R11L098079 |
Core Technology | Face recognition and pupil detection technology |
Operating Voltage | DC 12V/24V |
Minimum Operating Voltage | 9V |
Maximum Operating Voltage | 32V |
Working Current | 12V power, about 100mA 24V power, about 60mA |
Working Temperature | -10ºC ~ + 50ºC |
Storage Temperature | -45ºC ~ + 80ºC |
Detection Distance | 60-90cm |
Product Features:
1. early warning for fatigue and distraction driving status
2. non contact detection
3. suit for all vehicles
4. work around all day, under any weather
5. can be used with glasses and sunglasses
6. distinguish real doze or fake sleep, effectively reduce false warning.
7. easy to be installed and used.
Product Function:
1. in time driver fatigue warning alarm
2. distraction driving (look around) warning alarm
3. overspeeding driving warning alarm
4. integrate with fleet management system
5. output alert signals or images or videos to fleet management system
6. Vibration Cushion Alarm
Working Principle:
Detect pupil's changing characteristics, analyse eyes' fatigue condition:
Drivers normally aren't aware of fatigue driving before the actual accident happens. One of the most important functions of driver fatigue alarm system is to let the drivers understand they are actually in fatigue driving and increase their alertness level. Once the drowsiness detection system detects the driver is under fatigue driving, it will send out a sharp and loud sounds alarm immediately to the driver in cab based on pupil detection technology.At the same time, it will transmit the fatigue signal to the gps fleet tracking system, then the manager will know the driver's situation in office and take some actions to avoid the accident happened, in this way, they can realize the better fleet management.
When the fatigue warning appears as mentioned above, the driver should pull over immediately to have a rest to avoid accident. If the driver continues to drive without any rest, the anti sleep alarm mr688 will remind the driver to have a rest with making the sharp and loud sound whenever necessary.
Installation of Driver Fatigue Monitor:
Put 5 pin signal cable connect with power supply. (Please according to the part of AVL system (GPS) Connection),connect the 5 pin cable of host with 5 pin signal cable.
The step to install the device on the dashboard is just similar. Install the device on the dashboard right in front of the driver. The degree between the installation location and the driver's normal driving position should be within 20 degree. MR688 can be fixed on uneven surface as long as the camera is trained on the driver's face.
Tear the protective film from suction cup of bracket, put the host on the holder (If choose simple sticker bracket, please omit this step) Tear red sticker of holder's bottom, put the host on optimal position of dashboard lightly. Train the lens on your face and adjust the position of the lens according to the state of the green light. Do not block the main display parameters of the instrument panel.
The host connected with bracket, the lens must be installed vertical. Bracket can be adjusting the height from screw on the right side. Bracket has two universal balls, customers can adjust different direction. The lens must be installed vertically. That means the green light and the center of the lens remain in the vertical. Don't press the double-sided adhesive tape too firm at first, so the inappropriate position can be re-adjusted easily.
To test the right installation, sit in the normal position in the car, if the green light of the camera light up is bright or flashing, indicating that the driver has been detected in opening the eyes. The distance from lens to the driver's eyes should be between 60cm-90cm. when the driver are looking at the front and the green light remain bright, indicating that MR688 can detect the driver's eyes better. Adjust the correct position of the camera where the green light can keep on as far as possible. Flashing green light is normal while driver open the eyes, especially for the driver wearing rimmed spectacles.
The dashboard of truck and bus is low, try to install at higher position before the driver. If you install the device in the side front of the driver, the angle should be not more than 15 degree, the host should not be higher than the driver's eyes and the angle between the installation location and the driver's eyes should not more than 30 degree.
The distance from lens to the driver's eyes should be between 60cm-90cm. For some cases, such as: under the strong light, or the people with glasses, or the people with little eyes, the distance should be closer between 60cm-70cm. For normal people, the distance is between 70cm to 80cm.
Sit in the normal driving position. If the green light is on or twinkling, indicating that the driver has been detected in opening the eyes. If the green light is still on or flashing when the driver moves a little distance from left to right and down to up, indicating that the installation location is more reasonable. Then you can rest assured a safe driving. Flashing Green light is normal while driver open the eyes, especially for the driver wearing rimmed spectacles. If there is some shielding, the green light will be flashing.
Integration of Driver Fatigue Monitor:
1. Connect with Vibration Cushion
When driver fatigue monitor mr688 outputs warning alarm, vibration cushion will shake to warn the driver to pay high attention to the road at the same time.
2. Connect with Vehicle Management System
Driver fatigue monitor MR688 can output warning signals or images to AVL system to monitor driver's real time status and realize a better fleet management.
Packaging & Shipping
Packaging:
1pc packed in one color box, 20sets packed in one 7-ply carton box.
Our Services
Accepted Payment Method:
30% deposit in advance, 70% balance before shipping
T/T: generally for bulk orders
Paypal and Western Union: for sample orders
L/C: for order amount over US$50,000 only
Other Services:
A. accept OEM and ODM
B. customize logo and package
C. provide various flexible solutions
D. in time technical support and after sales service
E. fast delivery time
F. long quality warranty
G. MOQ: 1pc
Contact Information:
Hao Nai Industrial Co., Ltd
Care for driving, care for life
Contact person: Nancy Lee
If you are interested in our product, please send your inquiry below and click send. We will reply you very soon with more details.
Address:
24th Floor, No. 850 of Dongfengdong Road, Yuexiu District, Guangzhou, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Instruments & Meters, Security & Protection, Service
Company Introduction:
About us
Hao Nai Industrial Co., Ltd., located in Baiyu District, Guangzhou City, is a global technological leader in the area of vehicle safety and commercial fleet management solutions. Since the establishment in 2000, Hao Nai has successfully designed and developed its own systems of driver fatigue monitor, vehicle collision avoidance, GPS tracking system and mobile DVR in compliance with demands of the global market.
Company Profiles
As a high-tech enterprise, Hao Nai puts technology innovation and talents at the very first place. Hao Nai successfully cooperated with institutes of China world-famous universities including Peking University, Tsinghua University and South China University of Technology. These years Hao Nai keeps bringing high tech talents and has developed into an independent innovative enterprise with its own R&D center.
The brand "CareDrive" under Hao Nai has won worldwide reputation in the line of automotive safety management. CareDrive always insists on independent development and customer-oriented philosophy, maintains advanced innovation, and performs strict controls in the product quality. All systems come out in accordance with the standard of CE and RoHS.
With years of efforts, CareDrive has successfully acquired trust and support from global customers including world 500 top enterprises and the products have covered more than 150 countries with an export rate over 95%.
CareDrive′s dream: Help the fleet reduce 90% accidents, get every driver home safely.
Corporation Strengths
The brand "CareDrive" under Hao Nai has won worldwide reputation in the line of automotive safety management. CareDrive always insists on independent development and customer-oriented philosophy, maintains advanced creativity, and performs strict controls in the product quality. All systems come out in accordance with the standard of CE and RoHS.